LQ-5306 Type Printing Blanket for UV Printing

Short Description:

LQ Wing 5006 Type Printing Blanket is appropriate to package and metal UV printing.UV solidification and ultraviolet rays resistant. Convenient use, low thickness reduce for good print quality.


Product Detail

Product Tags

Specifications

Colour Jacinth
Thickness 1.97/1.70±0.02mm(4/3ply)
Compressible layer Microspheres
Surface Micro- ground and polished
Roughness 0.80 – 1.0μm
Hardness 76-82 shore A
Elongation ≤0.9%
Tensile strength ≥85

Structure

Structure

Blanket On Machine

Blanket On Machine

Precautions during usage

1.Check the flatness of its surface. The way to check is to print the full version, but the printing pressure should be lower than the normal pressure. In this way, the non-uniformity of its surface can be exposed. If the pressure is too large and the field is thick, it is difficult to see the difference.

2.If the unevenness of the surface is unacceptable (the specific indicators can be judged by experience), check the surface uniformity of the blanket and liner and whether there are foreign matters on the surface of the drum. After removing the foreign matter, if the non-uniformity still exists, the method of drawing "map" can be adopted. First draw every low (or weak) place, and then stick a sticker on the back of the blanket (the thickness of the paper is selected according to the situation).

3.The rubber blanket surface should be acid and oil resistant to prevent its surface layer from being damaged. The rubber blanket is often in contact with oil, which will cause its aging and finally loosen its internal organization. The blanket is often in contact with acidic substances, which will cause its surface corrosion. Wash with fast volatile detergent, such as gasoline, instead of kerosene and other slow volatile substances.

4. The rubber blanket surface shall be kept clean. The effective part of printing needs to be kept clean frequently.

Warehouse and package

Warehouse and package
Warehouse and package

  • Previous:
  • Next:

  • Write your message here and send it to us