LQ WING 5306 UV Printing Blanket for Offset Printing

Short Description:

LQ Wing 5306 UV Type Printing Blanket is appropriate to package and metal UV printing.UV solidification and ultraviolet rays resistant. Convenient use, low thickness reduce for good print quality. It’s developed for sheetfed offset press 10000 sheets per hour.


Product Detail

Product Tags

Specifications

Colour Jacinth
Thickness 1.97/1.70±0.02mm(4/3ply)
Compressible layer Microspheres
Surface Micro- ground and polished
Roughness 0.80-1.0μm
Hardness 76 - 82 Shore A
Elongation ≤0.9%
Tensile strength ≥85
Speed 10000 sheets/hour

Structure

Structure1
Structure2
Structure3

Blanket On Machine

Blanket On Machine1
Blanket On Machine2
Blanket On Machine3
Blanket On Machine4

Warehouse And Package

Blanket On Machine5
Blanket On Machine6
Blanket On Machine7
Blanket On Machine8

Precautions During Usage

1.Check the flatness of its surface. The way to check is to print the full version, but the printing pressure should be lower than the normal pressure. In this way, the non-uniformity of its surface can be exposed. If the pressure is too large and the field is thick, it is difficult to see the difference.

2.If the unevenness of the surface is unacceptable (the specific indicators can be judged by experience), check the surface uniformity of the blanket and liner and whether there are foreign matters on the surface of the drum. After removing the foreign matter, if the non-uniformity still exists, the method of drawing "map" can be adopted. First draw every low (or weak) place, and then stick a sticker on the back of the blanket (the thickness of the paper is selected according to the situation).


  • Previous:
  • Next:

  • Write your message here and send it to us