LQ-FP Analog Flexo Plates for Corrugated
Specifications
● Especially for printing on coarse corrugated fluted board, with uncoated and half coated papers
● Ideal for retail packages with simple designs
● Optimized for use in inline corrugated print production
● Very good ink transfer with excellent area coverage and high solid density
● Perfect adaptation to corrugated board surfaces reduces washboard effect
● Less plate cleaning due to special surface properties
● Extremely robust and durable material thus
● High print run stability
● Excellent storage capability
● Low swelling characteristic
● High resistance to ozone
Specifications
| SF-GT | |||||||||
| Analogue Plate for Carton (2.54) & Corrugated | |||||||||
| 254 | 284 | 318 | 394 | 470 | 500 | 550 | 635 | 700 | |
| Technical Characteristics | |||||||||
| Thickness (mm/inch) | 2.54/ 0.100 | 2.84/ 0.112 | 3.18/ 0.125 | 3.94/ 0.155 | 4.70/ 0.185 | 5.00/ 0.197 | 5.50/ 0.217 | 6.35/ 0.250 | 7.00/ 0.275 |
| Hardness(Shore Å) | 44 | 41 | 40 | 38 | 37 | 36 | 35 | 35 | 35 |
|
Image Reproduction |
2 – 95%100lpi |
3 – 95%100lpi |
3 – 95%80lpi |
3 – 90%80lpi |
3 – 90%80lpi |
3 – 90%80lpi |
3 – 90%60lpi |
3 – 90%60lpi |
3 – 90%60lpi |
|
Minimum Isolated Line(mm) |
0.15 |
0.20 |
0.30 |
0.30 |
0.30 |
0.30 |
0.30 |
0.30 |
0.30 |
|
Minimum Isolated Dot(mm) |
0.25 |
0.30 |
0.50 |
0.50 |
0.50 |
0.50 |
0.50 |
0.50 |
0.50 |
|
Back Exposure(s) |
30-40 |
40-60 |
60-80 |
80-100 |
90-110 |
90-110 |
150-200 |
250-300 |
280-320 |
|
Main Exposure(min) |
6-12 |
8-15 |
8-15 |
8-15 |
8-18 |
8-18 |
8-18 |
8-18 |
8-18 |
|
Washout Speed(mm/min) |
140-180 |
140-160 |
120-140 |
90-120 |
70-100 |
60-90 |
50-90 |
50-90 |
50-90 |
|
Drying Time (h) |
1.5-2 |
1.5-2 |
1.5-2 |
2-2.5 |
2-2.5 |
3 |
3 |
3 |
3 |
|
Post ExposureUV-A (min) |
5 |
8 |
8 |
8 |
8 |
8 |
8 |
8 |
8 |
|
Light Finishing UV-C (min) |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
Note
1.All processing parameters depend on, among others, the processing equipment, lamp age and the type of washout solvent. The above-mentioned values are only to be used as a guide.
2.Suitable for all water based and alcohol-based printing inks. (ethyl acetate content preferably below 15%, ketone content preferably below 5%, not designed for solvent or UV inks) Alcohol based ink can be treated as water ink.
3.All the Flexo plates in the market are all not comparable with solvent ink, they can use but it is their(customers) risk. For UV Ink, so far all of our plates cannot works with UV inks, but some of customer use it and get the good result but it doesn’t mean others one can get the same result. We are now researching the new type of Flexo plates it is works with UV ink.
